Mansueto LibraryΒ 
🚩

1100 E 57th St, Chicago IL, 60637 Find on Google Maps (opens in a new tab)

Chicago Building ID: 252064

Building Info

Square Footage
64,028 sqft
Lower than 87% of all buildings
1/2 median
139,707 sqft
0.5x median Library
125,828 sqft
Built
2009
Primary Property Type
Library
Community Area
Hyde Park
Owner
Not Tagged

Emissions & Energy Information for 2022

Greenhouse Gas Intensity
18.6 kg CO2e / sqft
#1 Highest of Librarys 🚨
Higher than 97% of all buildings
2.9x median
6.4 kg CO2e / sqft
1.5x median Library
12.2 kg CO2e / sqft
Total Greenhouse Gas Emissions
1,188.5 tons CO2e
Higher than 61% of all buildings
1.3x median
885.8 tons CO2e
0.9x median Library
1,385.2 tons CO2e

Years Reported 8/8 A

  • 2015 data reported

    2015

  • 2016 data reported

    2016

  • 2017 data reported

    2017

  • 2018 data reported

    2018

  • 2019 data reported

    2019

  • 2020 data reported

    2020

  • 2021 data reported

    2021

  • 2022 data reported

    2022

Energy Breakdown

Natural Gas Use
0 kBtu
#1 Lowest of Librarys πŸ†
Lower than 97% of all buildings
Median Chicago Building
5,818,399.6 kBtu
Median Library
387,594.5 kBtu
This Building Uses District Heating ❗

Although this building didn't burn any natural gas on site, it's connected to a district heating system, a centralized system for heating multiple buildings. District heating systems can be fully electric, but in Chicago most district heating systems are natural gas powered, meaning this building was most likely still heated with natural gas.

Electricity Use
2,398,786.1 kBtu
Est. Electric Bill: $101,000 for 2022**
#1 Lowest of Librarys πŸ†
Lower than 66% of all buildings
0.6x median
3,796,376.7 kBtu
1/2 median Library
5,415,153.3 kBtu
District Steam Use
9,413,400.5 kBtu

Most buildings don't use district steam, so we don't currently have comparison data.

District Chilled Water Use
4,695,839.8 kBtu

Most buildings don't use district chilling, so we don't currently have comparison data.

Energy Mix

Total Energy Use: 16,508,026 kBTU

View Extra Technical Info
Source Energy Usage Intensity
348.5 kBtu / sqft
#1 Highest of Librarys 🚨
Higher than 96% of all buildings
2.6x median
132.2 kBtu / sqft
1.4x median Library
245.3 kBtu / sqft
Site Energy Usage Intensity
257.8 kBtu / sqft
#50 Highest in Chicago* 🚩
#1 Highest of Librarys 🚨
3.3x median
78.4 kBtu / sqft
2.1x median Library
121.9 kBtu / sqft

Full Historical Data Table

Year Floor Area sqft Chicago Energy
Rating
GHG Intensity kg CO2e / sqft GHG Emissions metric tons CO2e Source EUI kBTU / sqft Electricity Use kBTU Natural Gas Use kBTU District Steam Use kBTU
2015 64,028 - 42.22,699741.24,143,062- 17,202,221
2016 64,028 - 28.01,791502.83,142,411- 11,748,959
2017 64,028 - 30.01,920.4539.03,058,227- 14,117,856
2018 64,028 2.0 27.41,756.5482.42,863,289- 13,603,648
2019 64,028 2.0 19.81,265.3352.92,713,758- 8,181,729
2020 64,028 2.0 18.11,160.9323.62,384,738- 7,438,787
2021 64,028 1.0 22.51,438.3411.52,594,4260 11,482,960
2022 64,028 2.0 18.61,188.5348.52,398,7860 9,413,400

* Note on Rankings: Rankings and medians are among included buildings, which are those who reported under the Chicago Energy Benchmarking Ordinance for the year 2022, which only applies to buildings over 50,000 square feet.

** Note on Bill Estimates: Estimates for gas and electric bills are based on average electric and gas retail prices for Chicago in 2021 and are rounded. We expect large buildings would negotiate lower rates with utilities, but these estimates serve as an upper bound of cost and help understand the volume of energy a building is used by comparing it to your own energy bills! See our Chicago Gas & Electric Costs Source (opens in a new tab) for the original statistics.

Data Source: Chicago Energy Benchmarking Data (opens in a new tab)

What Should We Do About This?

Practically every building has room to improve with energy efficiency upgrades like insulation, switching to ENERGY STAR rated appliances, and more, but for any buildings with large natural gas use, we recommend one thing: electrify!

In other words, buildings should look to move all on-site uses of fossil fuels (including space heating, water heating, and cooking) to electrically powered systems like industrial grade heat pumps, heat pump water heaters, and induction stoves. With Illinois' current electric supply, just using the same amount of energy from electricity, rather than natural gas (aka methane) will dramatically reduce greenhouse gas emissions. This is because Illinois' grid in 2020 was already 67% carbon-free (see Illinois - Power | DecarbMyState (opens in a new tab)). This has already been done across the country with a variety of buildings, large and small, like the Hotel Marcel (opens in a new tab).

You can help make this a reality by talking to building owners and letting them know that a building's emissions are important to you, and that you want to see their building become fully electric and stop emitting greenhouse gases. Particularly for buildings you have a financial stake in (like your university, work, condo building, or apartment building) your voice in concert with your fellow building users can have a huge impact.

Additional Resources

See some additional resources on improving energy efficiency and understanding this data: